Today we will talk about how manifold plug affects the hot runner system leakage. 1)  The manifold is welded with trachoma. 2)  The manifold plug is separated from the manifold plate. For example, six dro

Possible reasons: nozzle heater, sheath heater are burnt out, the thread is loose, and the connecting line is broken. Diagnosis method: 1) Do the multimeter test the resistance of the corresponding pin or hole of the

Possible reasons: nozzle heaters, sheath heaters are flattened, the wiring at the connectors touches the short circuit, and the connecting wire is melted and the wire core touches the short circuit. Diagnosis method

Hot runner temperature controller alarm display: (triac shorted) accompanied by rising temperature. Three terminal bidirectional thyristor switch short circuit Possible Reason: abnormal current leads to component dam

Hot runner system successful cases sharing------POM: 一： Material: POM POM is a highly crystalline material with high corrosivity.   The most common problem is that in injection molding, it is easy to appear b